The all NEW 4 LED boasts some serious output! This
impressive new light offers nearly twice the lumen output
of it’s HID predecessor.
The 4 high powered LED’s push out 960 lumens on max
power! Combine this with over 2 hours of burntime and it’s
a winning combination.
- Light Source: 4 x high power LED's
- Intensity: 960 Lumens Max
- Beam: 3 x spot (+/- 5 Degrees), 1 x Flood (+/- 15 Degrees)
- Mounting: Universal Handlebar Mount or Helmet (both included in box)
- Battery: 7.4v Li-Ion 5200mAh
- Charge Time: 6 Hours
- Weight: 415g, 540g (endurance version)
- Power levels: 4 (+ flashing mode)
- Burn Time: 2 hours 15 minutes - 35 hours +
The NEW! CNC machined lamp body mounts to the NEW!
reinforced nylon handlebar bracket, which fit’s both
standard and OS bars with the clever use of removable
rubber plugs. The bracket also allows for lateral adjustment
of the lamp whilst riding.
The 7.4v Li-ion battery pack is the same as the 2 LED’s ‘Epic’
version - with it’s 4 cells giving 5200mAh. The battery has
built in charge, discharge and short circuit protection. The
connectors are fully sealed and totally waterproof (IP67).
The light has a simple on/off/mode switch on the back. This
has a new cycle programme which turns the light on in ‘low’
mode and cycles through to the higher settings. This gives
better control of the light in tricky situations when more
light is needed quickly.
In tests the 7.4v Li-ion battery wil last for upto 35hrs on low,
and 2h 15min* on max, with the intelligent charger returning
that in just 6 hours. The PVC case is small enough to fit
under most stems, top tube junctions or slip into a
hydration pack or jersey pocket.
The 4 LED model now utilises ‘thermal throttling’ techniques
to increase the longevity of the LEDs and prevent damage
to the electrical circuit due to overheating. This works by
monitoring the temperature of the Aluminium heat sink
and restricting the power when it reaches a critical level,
thereby keeping the casing at an acceptable temperature
for handling while providing extended battery burn times
by reducing the amount of energy lost through heat.
As well as the universal handlebar clamp, a NEW! reinforced
nylon helmet mount is also included, as well as ample velcro
fastenings.
This light is perfect for Endurance events, 12/24hr racing and
night riding alike. It gives more light than you’ve ever had
before with sensible run times and a low system weight.
USE: When it goes dark! Really dark!
HOPE VISION LED
The Vision lighting range from Hope is a premium quality product
line, aimed at the enthusiast and racer alike.
Originally developed (as with most Hope products) as a result of
the owners’ and employee’s need for a high performance, reliable
lightset - that combines enough run time and power output to
allow typical riding to be enjoyed as much in the dark as in the
day.
As with most electronics, the technology is quickly advancing and
LED lighting is constantly evolving. As a compact operation we
can react quickly to this - making sure our lights are always using
the very latest drive circuits, LED’s, collimating lenses and battery
technology.
We take a simple, no nonsense approach to how we design and
produce our lights. You’ll find usable run time, battery options and
power levels that offer most people what they need from a light
without any unnecessarily large batteries.
Aside from the in house CNC machined lamp bodies, we have a
dedicated light assembly facility - in which we hand assemble each
and every lightset. Processes such as soldering of leads to batteries
and circuit boards all takes place in the Factory, where we also
hand check all connections and operations of the light before it’s
final assembly takes place, again, by hand.
Our lights have been used all over the world for all sorts of activities.
The high quality, reliability and performance has proven itself time
and time again, and it’s always good to know that the light’s you are
using can give you all that, and more.
